Decoding a Square Body's Paint Code: The SPID Label, GM Two-Tone Codes, and Why the Original Colors Are Still Mixed Today
Every square body restoration reaches the same moment. The truck is straight, the gaps are right, and then someone has to answer a simple question: what color was it, exactly? Not red, not blue, not the faded shade peeling off the hood, but the precise factory color it left the plant wearing. On a 1973 to 1987 Chevrolet or GMC pickup, that answer is usually hiding in plain sight, on a paper label most owners have opened their glove box past a thousand times without reading.
That label is the SPID, short for Service Parts Identification. General Motors used it as the truck's factory record, a single sticker carrying the vehicle identification number, the model number, and a grid of three-character RPO codes, with RPO standing for Regular Production Option. Every factory option on the truck has a code in that grid: the engine, the axle, the transmission, the trim level, and, on its own line at the bottom of the label, the paint. If you want to know how a square body was built, the SPID is the closest thing to a birth certificate that survived with the truck.
Finding it depends on the year. On 1973 and 1974 trucks the label is often under the hood, on the driver's side inner fender below the brake master cylinder. From the mid-1970s through 1987 it moved to the inside of the glove box door, where most square body owners will find it today, though a few trucks still carry it on the inner fender. The label is paper, so after four or five decades it may be faded, torn, or gone entirely. A useful habit is to photograph it in good light at a slight angle as soon as you buy the truck, before time and glove box clutter finish what the years started.
Reading the paint line takes care, because GM did not make it simple. Most RPO codes are three characters, but exterior paint breaks the pattern: the standard colors are two-digit codes, while interior codes run longer. The two-digit list covers the familiar palette, including code 12 Frost White, code 19 Midnight Black, code 23 Hawaiian Blue, and code 70, listed as Cardinal Red and as Carmine. That last example is the warning for the whole system. GM reused codes and names across a fourteen-year run, so the same number can mean a different shade in a different year. Polar White even changed codes during the run, appearing as both 89 and 93. Matching by name alone, or by code without the model year, is how a restoration ends up one shade off.
Two-tone trucks add another layer, and it is the layer that defines the square body look. On upper trim trucks the factory paired a main body color with a contrasting band, roof, or lower section, divided by bright molding. In the earlier years of the run, GM did not simply list two separate two-digit colors and leave the rest to the painter. Its code lists carry dedicated three-digit paint codes for the treatments themselves, with whole families labeled Deluxe, Conventional Two-Tone, and Special Two-Tone. Glenwood Green, Spanish Gold, Sunset Gold, Crimson Red, and Hawaiian Blue all appear in Conventional Two-Tone form, and several of them appear again in Special Two-Tone form, because where the second color fell on the body was part of the specification, not a detail. On later paperwork the same idea shows up in upper and lower form, with U and L markers telling the mixer which color belongs where, alongside the WA-prefixed mix codes and BC/CC notations for basecoat and clearcoat. Two trucks can share a main color and still be different factory paint jobs, and the SPID is what settles which one yours was.
There is one more trap. The SPID records how the truck left the plant, not what has happened since. Glove box doors get swapped and trucks get repainted. If the label and the truck disagree, check for original paint in protected places such as under trim and inside the cab, and treat the label as the starting point rather than the final word.
The good news is that getting the original color mixed today is easier than most owners expect. As Street Trucks reported, the original R-M paint color sheets for 1973 to 1987 GM pickups, shared by Joe Yezzi of Squarebody Syndicate, show codes and swatches for colors including Ochre, Burnt Orange, Yellow Gold, and Light Saddle, and those exact colors are still available from R-M through BASF. Through BASF distributors, builders can access all of the original GM pickup paint codes for square body trucks. R-M, short for Rinshed-Mason, has supplied the industry for about 100 years. The code on your SPID is not a museum artifact. It is a live formula reference.
So start any square body paint decision at the glove box door. Write down the full paint line, note the model year beside it, confirm whether the truck was a solid color or one of the factory two-tone treatments, and take that code and year, not a color name from memory, to the paint supplier. Do that, and the color that goes on the truck is the one GM put there in the first place, which is the whole point of decoding the label.