Friday, November 20, 2026About & guidelinesPistonsPR
Recalls & Safety

The CP4 Problem Explained: How One Bosch Fuel Pump Hurt Cummins, Duramax and Power Stroke Owners

By Pistons News · Nov 18, 2026 · 10:07 AM ET

Ask a diesel shop which part changed how owners shop for a used heavy-duty truck, and the answer comes fast. It is a fuel pump the size of a small loaf of bread, the Bosch CP4, and for more than a decade it has sat at the center of blown budgets, stalled trucks, recalls, and lawsuits covering all three domestic diesel brands.

The CP4 arrived as progress. For 2011, Ford's new 6.7-liter Power Stroke and General Motors' 6.6-liter Duramax LML both switched from the older Bosch CP3 pump to the CP4.2. The new pump was lighter, with an aluminum case instead of steel, more efficient, and built for higher pressure, up to 36,000 psi in the domestic truck applications. Where the CP3 used three plungers, the CP4 used two, driven by a dual-lobe camshaft through roller followers.

The trouble is how it lives and how it dies. The CP4 is lubricated by the diesel fuel itself, which floods the housing and is supposed to keep the cam and roller followers apart. Nothing stops a follower from rotating in its bore. If it turns sideways, the roller stops rolling and starts dragging across the cam. Air in the system, a dry start after a filter change, or fuel with poor lubricity can start the wear. Once metal comes off the cam and follower, fine particles pass the pump's internal screen and are sent onward to the rails and injectors, then back to the tank. The failure feeds itself and contaminates everything it touches.

That is why a CP4 failure is rarely just a pump. The common repair replaces the pump, injectors, rails, lines, and filters, and cleans or replaces the tank and lift pump. GM's own service procedure for an affected Duramax runs an estimated 18 to 21 hours. Owners and court filings put the bill routinely at 8,000 to 15,000 dollars, with complaints citing up to 20,000 dollars. Warning can be little more than a check-engine light before the truck stalls and will not restart.

Exposure depends on the badge. Ford has used the CP4 on every 6.7-liter Power Stroke from 2011 to the present, longer than anyone. GM used it on the Duramax LML and the LGH van engine from 2011 to 2016, then switched the redesigned L5P Duramax in 2017 to a Denso HP4 pump. The LML also had no electric lift pump, relying on a gear pump to draw fuel, which technicians argue made starvation more likely. Ram came last and left fastest, using the CP4.2 only on 2019 and 2020 Cummins trucks before returning to the CP3 for 2021.

Ram also issued the clearest fix. Recall Y78, NHTSA campaign 21V-880, covered 222,410 Ram 2500, 3500, 4500, and 5500 trucks built from October 11, 2018 to November 13, 2020. The federal filing says pump failure can introduce debris into the fuel system, cause fuel starvation, and cause an unexpected loss of motive power. FCA reported 495 customer assistance records and 6,399 warranty claims potentially related to the issue, and no accidents or injuries. The remedy replaces the pump with a new design, updates the engine software, and inspects and replaces other fuel system parts as needed, free of charge.

Ford's recall was narrower. Campaign 24V-957, Ford's 24S78, covered 295,449 trucks, mainly 2020 to 2022 Super Duty and 2021 to 2022 medium-duty models with the 6.7-liter diesel. Ford blamed aged biodiesel deposits forming on the pump roller and in the tappet cooling passages, causing wear and metal debris. The remedy is software, not hardware. Dealers reflash the powertrain and transmission modules to increase pump cooling and prevent deposits, at no charge. Ford has never recalled the CP4 out of the Power Stroke, and the pump remains in current production.

The courts have split by brand. In Chapman v. General Motors, a federal judge granted final approval on May 6, 2025 to a settlement valued at 50 million dollars, with 30 million dollars for owners who paid for CP4 repairs and 5 million dollars for owners who overpaid for their trucks. The class covers buyers of covered 2011 to 2016 Duramax trucks purchased from GM dealers from March 1, 2010 to September 13, 2024 in California, Florida, Illinois, Iowa, New York, Pennsylvania, and Texas.

Ford's case, Droesser v. Ford Motor Company, is still open. On September 30, 2026, Judge Laurie J. Michelson certified classes for certain buyers in California, Louisiana, Ohio, Pennsylvania, and South Carolina who paid out of pocket for a repair, and largely denied Ford's motion for summary judgment. Certification is not a finding that the pump is defective. Ford has asked the Sixth Circuit for permission to appeal, and there is no settlement or trial date. Across the cases, plaintiffs allege the CP4 was designed around European diesel, which has higher lubricity than American ultra-low-sulfur diesel. The aftermarket has answered with additives, added filtration, debris containment kits, and conversion pumps.

For a buyer today, the checklist is short. A 2019 or 2020 Cummins truck needs proof the Y78 recall was done. An LML Duramax needs a clean fuel system history and a repair fund, now partly softened by the GM settlement for eligible owners. Any Power Stroke since 2011 needs the same math, plus the biodiesel software recall check on 2020 to 2022 trucks. These remain capable trucks. The CP4 is simply the first line item to verify, because no ten-pound part in the modern diesel era has cost owners more.

More top stories